Home » Solution for E-Motor » HIGH PRECISION LASER CUTTING MACHINE CX-CC6060L

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

HIGH PRECISION LASER CUTTING MACHINE CX-CC6060L

Application industry: E-motor stator & rotor core laminations
Processing accuracy: 0.01 mm
Max cutting speed: 90 m / min
Procssing range: 600 mm * 600 mm
Continuous working time: > 20 hours
User-friendly interface, Low Maintenance, Energy Efficiency
Availability:
Quantity:
Equipment Introduction

CHlaser CX-CC series precision laser cutting machines are well-known for high level cutting quality, precision and efficiency. This equipment is mainly developed to cut electric steel laminations that will be used for producing EV motors, which has very high standard on cutting precision. CX-CC 6060L can achieve repeat positioning accuracy of up to 0.005 mm. The efficient cutting efficiency is 25% higher than that of traditional machine tools. It is the first choice for precision processing of sheet metal!


Advantages
• Gantry structure is applied to achieve very high processing speed and accuracy, with repeat positioning accuracy up to 0.005MM
• The software is a closed loop control system that the cutting process can be made automatically without manual intervention.
• Non-contact processing, small stress deformation, optional dual-station operation mode, higher processing efficiency.
• A marble worktable is used to ensure the accuracy, reliability and stability of the equipment under high-speed operation.
• Customized laser sources and torches are equipped based on clients' demand to ensure all the processing requirement are fulfilled.
• Special laser cutting system, real-time feedback on software interface, which help operators to avoid materials waste and improve cutting efficiency.


Parameter

Model NumberCX-CC6060L
Laser wave length1080±5nm
Average output power150W-3300W
Min line width±0.01mm
Repetive positioning accuracy±0.01mm
Max cutting speed90m/min
Max accelerate speed1.5G
Continuous working time≥20Hours
Cutting accuracy600mm*600mm
Power supply380VAC +10% 50Hz
Transmission mathodLinear motor
Dimensions1900mm*1450mm*1800mm

Comparison of Different Processing for Stator Core

Processing NumberWire CuttingLaser CuttingDie Casting
Accuracy±0.01mm±0.02mm±0.02mm
Quality

Poor processing of small bend

ssharp corners,embosses and other fine details

Smooth, no distortion,

burr height<0.02mm,Minimum R angle can reach 0.1mm

Small sharp corners will collapseand become large R angles
DificuityEach hole needs deburringso efficiency is very lowwhen there are many holesSimple to operate, anyshape can be machinedNot limited by geometryPressing Moulds need tobe pre-designed and manufactured,which is complex and time-consuming
Cycle Time10 days +2 days30 days+ (Inlc. Mould Opening Time)
Post-processNeed pre-cleaningNo post-processingNo post-processing
FlexibilityEasy to modify drawingEasy to modify drawingMould amendment or reopen
Prototyping Cost>3000 USD<2000 USD>15000 USD
Processing LossElectric Power, Protection LiquidElectric Power, Press AirElectric Power, Mould Loss



Previous: 
Next: 
Copyright © 2024 CH Laser. All Rights Reserved.
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×