E-mail:chlaser@chlaser.com English Chinese
Keyword : Fiber Laser Marking machine CO2 laser marking machine Portable laser marking machine
Your current position:Home > News > Technical news >
Company News Technical news News

Will fiber laser cutter instead of Co2 model

Date:2019-08-06 17:53 Write:admin Click:


Nowadays, laser equipment is changing with each passing day. The new equipment has replaced the old equipment and become the new mainstream of the manufacturing industry. The pace is increasing, such as fiber laser cutting machine instead of CO2 laser cutting machine. Why fiber laser cutting machine can replace CO2 laser cutting machine, the following three aspects to analyze.


First, maintenance costs
CO2 laser cutting machine: the maintenance cost is high, the front mirror and the tail mirror are expensive, the life of the turbine bearing is short, and the replacement cost is large. Fiber laser cutting machine: maintenance-free, basically no consumables, and capable of handling harsh environments, with high tolerance to dust, shock, shock, humidity and temperature.


Second, processing costs
The photoelectric conversion rate of CO2 laser cutting machine is only 8%-10%, and the photoelectric conversion rate of fiber laser cutting machine can reach 30%. For factory production, even if it only has a 1% increase, it can save a lot of money in the long run.


Third, technology
The CO2 laser has a complicated structure, high maintenance cost, and is large in beam divergence during processing, and is not suitable for large-format processing. Although the slit is relatively thin, it is very slow when processing thick plates. The laser characteristics of the fiber laser cutting machine are characterized by miniaturization, intensification, high brightness and high conversion rate. In the thin plate processing, the same power fiber laser cutting machine has a cutting speed of 2-3 times higher than that of CO2, and the cutting section is smooth.